Australian Made Mining Feeders for Mineral Processing
Australian made apron, belt, vibrating and grizzly feeders for controlled discharge into crushers, screens, conveyors and chutes.
HOPPER, BIN AND RECLAIM FEED
Regulate material leaving storage points before it reaches the next process stage.
SELECTED AROUND THE FEED DUTY
Consider feed rate, lump size, loading conditions, impact, wear and available space.
SUPPORTED BEYOND SUPPLY
Western Australian manufacturing, spare parts and project support from one team.
Feeders That Set the Pace of the Plant
Feeders help determine how material leaves a hopper, bin, stockpile or upstream process before it reaches the next stage of the circuit. A correctly selected feeder can help manage surge, reduce uneven loading and support more consistent operation through crushers, screens, conveyors and transfer points.
Oreflow supplies apron feeders, belt feeders, vibrating feeders and grizzly feeders for mining, mineral processing and bulk materials handling applications. The right feeder depends on the material being handled, how it is loaded, the required feed rate, the available footprint and the equipment receiving the discharge.
From heavy impact loading ahead of crushers to steady conveyor loading from bins and reclaim points, Oreflow can help configure feeder solutions around the practical requirements of the site.
Choose the Right Feeder Type for the Duty
Oreflow’s feeder range is designed to support different discharge, transfer and process duties across mineral processing plants. Use the guide below as a starting point, then view the individual feeder pages for more detail.
Apron Feeders
Heavy-duty feeders for coarse material, impact loading and controlled hopper discharge, commonly used ahead of crushers or primary process equipment.
Belt Feeders
Belt feeders for steady discharge from hoppers, bins or reclaim points where material needs to be presented consistently onto conveyors or process equipment.
Vibrating Feeders
Vibrating feeders for metered material movement into crushers, screens, conveyors and process equipment where a compact feeding arrangement is suitable.
Grizzly Feeders
Grizzly feeders for controlled feeding and oversize separation ahead of crushers, helping regulate feed while removing or bypassing selected material.
Where Feeders Are Used in the Process
Oreflow feeders are used where material needs to be drawn out, metered, separated or presented to the next stage of the plant in a controlled way.
Hopper and Bin Discharge
Managing material flow from storage points, surge bins and process feed points.
Crusher Feed
Supplying primary, secondary or tertiary crushers with a more consistent feed stream.
Screen Feed
Feeding vibrating screens where steady presentation can support screening performance.
Conveyor Loading
Loading conveyors from hoppers, bins or transfer points while considering belt loading, skirts and chute layout.
Reclaim and Stockpile Duties
Drawing material from storage areas where flow consistency and access for maintenance need to be considered.
Grizzly and Scalping Duties
Feeding crushers while removing, bypassing or separating selected oversize material before it enters the next stage.
Where Feeder Selection Starts
Feeder selection starts with understanding how material behaves before, during and after discharge. Oreflow considers the storage arrangement, loading method, required feed rate, lump size, wear conditions and how the feeder connects with surrounding equipment.
Material Behaviour
Particle size, lump size, bulk density, moisture content, abrasiveness, stickiness and tendency to bridge or surge.
Feed Rate and Process Duty
Required tonnes per hour, level of flow control, surge requirements, operating hours and the sensitivity of the receiving equipment.
Loading Arrangement
Bin geometry, live load, drop height, loading method and the way material lands on the feeder.
Discharge and Transfer Point
Discharge height, direction of flow, skirt arrangement, chute interface and how material needs to enter the next process stage.
Drive and Control Requirements
Drive type, speed control, start-up load, site power, guarding and integration with plant control requirements.
Access and Maintainability
Inspection access, wear liner replacement, belt or pan access, motor access and spare parts requirements.
Featured Feeder: Vibrating Feeders for Metered Transfer
For many mineral processing applications, vibrating feeders provide a practical way to meter material into crushers, screens, conveyors or chutes. Oreflow vibrating feeders can be configured around feed rate, material behaviour, installation footprint, drive arrangement and access requirements.
They can be suited for applications such as:
- Feeding crushers
- Feeding vibrating screens
- Conveyor loading
- Hopper and bin discharge
- Controlled material flow
- Mineral processing circuits
Workshop Checks Before Site Installation
Before delivery, Oreflow can complete workshop checks to support installation and commissioning. Depending on the feeder type and project scope, this may include reviewing feeder movement, drive operation, guarding, clearances, access points and general build completion before the equipment leaves the workshop.
Frequently Asked Questions
What types of mining feeders does Oreflow supply?
Oreflow supplies feeder solutions for mining, mineral processing and bulk materials handling applications, including apron feeders, belt feeders, vibrating feeders and grizzly feeders.
What is the difference between apron, belt, vibrating and grizzly feeders?
Mining feeders are used to control the flow of material from hoppers, bins, stockpiles or upstream plant equipment into crushers, screens, conveyors and downstream process equipment.
What information helps specify a feeder?
Useful information includes material type, lump size, bulk density, moisture content, abrasiveness, required feed rate, hopper arrangement, loading method, discharge height, receiving equipment, available space and maintenance access requirements.
Can Oreflow manufacture feeders in Australia?
Yes. Oreflow manufactures feeders in Western Australia for mining, mineral processing and bulk materials handling applications.
Can Oreflow feeders be integrated with existing plant equipment?
Yes. Oreflow can configure feeders around existing hoppers, bins, crushers, screens, conveyors, chutes and surrounding plant layout requirements.
Can Oreflow provide feeder spare parts and support?
Yes. Oreflow can support spare parts, replacement components and selected refurbishment requirements depending on the feeder type, design and project scope.
Need Help Specifying a Feeder?
Share your material type, lump size, feed rate, hopper or bin arrangement and receiving equipment with Oreflow. Our team can help identify whether an apron, belt, vibrating or grizzly feeder is the right starting point for the duty.
ISO 9001:2015 Certified
Built in WA, delivered worldwide.
